Testers

NX Solo

By February 21, 2019 January 16th, 2024 No Comments

NX Solo

Dynalab NX Solo
Dynalab NX Solo
  • Stand-alone operation
  • Supports network file transfer and reporting
  • Accurate component testing
  • Keyed security access
  • Built for rough industrial environments
  • Tests up to 256 test points

The Dynalab NX Solo Tester is an economical, feature-rich, stand-alone wire harness tester offering up to 256 test points. The powerful NX Editor software application is used to create unique program files to successfully validate all electrical and electro-mechanical wire harness parameters. This tester is compatible with all Dynalab NX accessories such as printers, scanners, control ports, and much more. The NX Solo Tester supports network communications with the NX Server for efficient file transfers and advanced data collection.

For test applications that span the range from simple to complex, Dynalab’s NX Testers offer more features than the competition at a lower price!

ItemSpecifications
ConnectionsContinuity:
0.1 Ω - 10 Ω (±0.1Ω)
10 Ω - 500KΩ (±1%)
500KΩ - 2MΩ (±5%)

Shorts:
1KΩ - 2MΩ (± 20%)
ComponentsResistors:
0.1 Ω -10 Ω (±0.1Ω)
10 Ω - 500KΩ (±1%)
500KΩ - 2MΩ (±5%)

Diodes:
Checks for proper orientation

Capacitors:
100pF - 100,000uF (±2% to ±20%, ±10pF based on capacitor type)
4-Wire (Kelvin) Mode0.005 Ω - 100 Ω (±1%, ±0.005 Ω)
Relay TestingCapable of active relay testing
Testing MethodUtilizes proprietary electronic switching circuits designed to validate connections from NX Editor program data.
Test VoltageTest voltage is defined by the NX Tester for optimum resistance measurements. The voltage will not exceed 14VDC and cannot be configured by the user.
Test CurrentTest current is defined by the NX Tester for optimum measurements. The current will not exceed 5mA DC and cannot be configured by the user.
Test Speed1 seconds per 1024 test points (continuity only)
3 seconds per 1024 test points (continuity and shorts)
DisplayErrors are displayed using connector names, wire names, and wire color on a 4-line x 20 character display.
Audible TonesProvides a variety of user programmable tones for error notification and special events.
Program StorageApproximately 150 to 250 test programs containing under 256 test points. File storage will be reduced with programs that contain higher test point counts. 3.3MB Internal Memory Size.
Control PortConnects the optional Control Port Module for controlling two outputs and monitoring one input.
Serial PortsTwo RS-232 serial ports for connecting printers, bar code scanners, extended displays or the Modular Control System. Two additional RS-232 ports are available with the optional Communication Board.
Network PortNetwork port to allow communication to the NX Server for program file transfers and advanced reporting. Available with the optional Communication Board (100 Mbps).
Test Point Interface64 pin card edge connector
Input PowerUses external power supply rated for 100 – 240VAC, 50-60Hz, 30W max. Power supply provides 15VDC to the NX Tester.
Test Point Capacity64, 128 or 256 test points
Size (W x D x H)10.7” x 7.5” x 2.8” (27.2 cm x 19 cm x 7.1cm)
Weight5.1 lbs (2.3 Kg)
Operating ParametersTemperature: 32– 122 degrees F (0– 50 degrees Celsius)
Humidity: 90% non-condensing
WarrantyOne year parts and labor
CertificationsCE Certified
terminal block interface

Terminal Block Interface

The terminal block and ribbon cable are used to connect the customer’s test fixture to the NX Tester. Learn More

discrete wire

Discrete Wire Interface

The edge connector and discrete wires are used to connect the customer’s test fixture to the NX Tester. Learn More

mta header interface

Header Post Interface

The header assembly and ribbon cable are used to connect the customer’s test fixture to the NX Tester. Learn More

Test Point Board

Test Point Board

Each board adds 128 test points to any NX Tester that has available space. Part Number: 5-4002

Communication Board

Communication Board Kit

Adds two additional RS-232 serial ports to connect to a printer or scanner, and one network port (100 Mbps) to connect to the NX Server.  Part Number: 5-4011

Enhance the NX Tester’s graphics and reporting capabilities with the NX View software application.

NX View
NX View
Reporting

Select the part number below that corresponds to the quantity of test points required (How to calculate?)

Part #Description
1-064-0NX Solo Tester with 64 Test Points
1-128-0NX Solo Tester with 128 Test Points
1-256-0NX Solo Tester with 256 Test Points
Communication Board Option
Adds two additional RS-232 serial ports to connect to a printer or scanner, and one network port to connect to the NX Server. To order a tester with this option, replace the last digit of the part number with "1" (i.e. 1-256-1).
NX View Software
Software application that enhances the user experience with additional information, graphics, program storage and reporting. Learn More